Skip to main content

Running a mainnet node

This procedure demonstrates how to run a local mainnet node using Docker images.

note

This procedure focuses on Unix-like operating systems (Linux and MacOS). This procedure has not been tested on Windows.

Prerequisites​

Running a node has no specialized hardware requirements. Users have been successful in running nodes on Raspberry Pi boards and other system-on-chip architectures. In order to complete this procedure, you must have the following software installed on the node host machine:

Firewall configuration​

In order for the API node services to work correctly, you must configure any network firewall rules to allow traffic on the ports discussed in this section. The details of network and firewall configuration are highly specific to your machine and network, so a detailed example isn't provided.

The following ports must open on the host machine:

Ingress:

  • stacks-blockchain (open to 0.0.0.0/0):
    • 20443 TCP
    • 20444 TCP

Egress:

  • 8332
  • 8333
  • 20443-20444

These egress ports are for syncing stacks-blockchain and Bitcoin headers. If they're not open, the sync will fail.

Step 1: Initial setup​

In order to run the mainnet node, you must download the Docker images and create a directory structure to hold the persistent data from the services. Download and configure the Docker images with the following commands:

docker pull blockstack/stacks-blockchain

Create a directory structure for the service data with the following command:

mkdir -p ./stacks-node/{persistent-data/stacks-blockchain/mainnet,config/mainnet} && cd stacks-node

Step 2: Running Stacks blockchain​

First, create the ./config/mainnet/Config.toml file and add the following content to the file using a text editor:

[node]
working_dir = "/root/stacks-node/data"
rpc_bind = "0.0.0.0:20443"
p2p_bind = "0.0.0.0:20444"
bootstrap_node = "02da7a464ac770ae8337a343670778b93410f2f3fef6bea98dd1c3e9224459d36b@seed-0.mainnet.stacks.co:20444,02afeae522aab5f8c99a00ddf75fbcb4a641e052dd48836408d9cf437344b63516@seed-1.mainnet.stacks.co:20444,03652212ea76be0ed4cd83a25c06e57819993029a7b9999f7d63c36340b34a4e62@seed-2.mainnet.stacks.co:20444"
wait_time_for_microblocks = 10000

[burnchain]
chain = "bitcoin"
mode = "mainnet"
peer_host = "bitcoin.blockstack.com"
username = "blockstack"
password = "blockstacksystem"
rpc_port = 8332
peer_port = 8333

[connection_options]
read_only_call_limit_write_length = 0
read_only_call_limit_read_length = 100000
read_only_call_limit_write_count = 0
read_only_call_limit_read_count = 30
read_only_call_limit_runtime = 1000000000

Start the stacks-blockchain container with the following command:

docker run -d --rm \
  --name stacks-blockchain \
  -v $(pwd)/persistent-data/stacks-blockchain/mainnet:/root/stacks-node/data \
  -v $(pwd)/config/mainnet:/src/stacks-node \
  -p 20443:20443 \
  -p 20444:20444 \
  blockstack/stacks-blockchain \
/bin/stacks-node start --config /src/stacks-node/Config.toml

You can verify the running stacks-blockchain container with the command:

docker ps --filter name=stacks-blockchain

Step 3: Verifying the services​

info

The initial header sync can take several minutes, until this is done the following commands will not work.

To verify the stacks-blockchain burn chain header sync progress:

docker logs stacks-blockchain

The output should be similar to the following:

INFO [1626290705.886954] [src/burnchains/bitcoin/spv.rs:926] [main] Syncing Bitcoin headers: 1.2% (8000 out of 691034)
INFO [1626290748.103291] [src/burnchains/bitcoin/spv.rs:926] [main] Syncing Bitcoin headers: 1.4% (10000 out of 691034)
INFO [1626290776.956535] [src/burnchains/bitcoin/spv.rs:926] [main] Syncing Bitcoin headers: 1.7% (12000 out of 691034)

To verify the stacks-blockchain tip height is progressing use the following command:

curl -sL localhost:20443/v2/info | jq

If the instance is running you should receive terminal output similar to the following:

{
  "peer_version": 402653184,
  "pox_consensus": "89d752034e73ed10d3b97e6bcf3cff53367b4166",
  "burn_block_height": 666143,
  "stable_pox_consensus": "707f26d9d0d1b4c62881a093c99f9232bc74e744",
  "stable_burn_block_height": 666136,
  "server_version": "stacks-node 2.0.11.1.0-rc1 (master:67dccdf, release build, linux [x86_64])",
  "network_id": 1,
  "parent_network_id": 3652501241,
  "stacks_tip_height": 61,
  "stacks_tip": "e08b2fe3dce36fd6d015c2a839c8eb0885cbe29119c1e2a581f75bc5814bce6f",
  "stacks_tip_consensus_hash": "ad9f4cb6155a5b4f5dcb719d0f6bee043038bc63",
  "genesis_chainstate_hash": "74237aa39aa50a83de11a4f53e9d3bb7d43461d1de9873f402e5453ae60bc59b",
  "unanchored_tip": "74d172df8f8934b468c5b0af2efdefe938e9848772d69bcaeffcfe1d6c6ef041",
  "unanchored_seq": 0,
  "exit_at_block_height": null
}

Stopping the mainnet node​

Use the following commands to stop the local mainnet node:

docker stop stacks-blockchain

Additional reading​